Application and Solution of Fluorescent Fiber Optic Temperature Measurement in Power System-INNO

FJINNO company has developed a temperature measurement scheme using fluorescent optical fiber technology, based on the temperature measurement characteristics of substation equipment. Itu fluorescence fiber temperature measurement technology based on rare earth materials has a temperature signal that is independent of the intensity of fluorescence conduction. There is no need for electrical connection between the measurement point and the measurement signal receiving part, which fundamentally solves the problem of temperature measurement in harsh environments such as high voltage, strong electromagnetic, mudah terbakar dan meledak, and has become the preferred solution for temperature measurement of substation equipment.

Temperature measurement is an important means of fault detection and maintenance in power systems. In current hot spot temperature measurement in power systems, traditional electrical signal temperature sensors are mainly used. These sensors are not suitable for situations where the power system voltage is high, insulation requirements are high, and electromagnetic interference is strong. They cannot directly measure the hot spot temperature inside electrical equipment. Karena itu, it is necessary to find a method that can be applied to hot spot temperature measurement of power systems and electrical equipment.

Pengukuran suhu serat optik neon technology can solve the problem of hot spot temperature measurement in power equipment. It has the characteristics of high voltage resistance, isolasi tinggi, dan ketahanan terhadap interferensi elektromagnetik, and is the future development direction of hot spot temperature measurement technology for electrical equipment in power systems. Fiber optic temperature measurement technology mainly includes two types: serat optik terdistribusi temperature measurement technology and infrared temperature measurement technology. Diantaranya, infrared temperature measurement technology can only measure the surface temperature of electrical equipment and cannot measure the hot spot temperature inside electrical equipment. The installation method of fluorescent fiber optic temperature measurement technology is the same as that of conventional electrical signal temperature sensors, and can be directly embedded in electrical equipment, so it has strong convenience in use.

Itu pengukuran suhu serat optik fluoresensi device system is divided into two parts: the bottom temperature measurement unit and the upper computer system. The bottom temperature measurement unit consists of multiple fiber optic temperature measurement devices such as transformers, switchgear tegangan tinggi, high-voltage busbars, cable heads, dll.. The upper computer system consists of a main control room, on-site monitoring devices, dll.. The fiber optic temperature measurement device adopts RS485 interface communication method, which is converted into fiber optic communication signals through photoelectric converters, and realizes remote communication with the upper computer system composed of remote main control room, on-site monitoring devices, dll., to improve the reliability and anti-interference ability of the communication system.

A complete temperature measurement scheme was designed based on pengukuran suhu serat optik fluoresensi technology and combined with substation equipment. After experimental verification, the temperature measurement range of the temperature measurement system reaches -40 ℃ ke 200 ℃, with an accuracy of 1 ℃, which meets practical requirements. The temperature measuring device has the characteristics of low cost, kinerja yang stabil, strong practicality, fast and stable response, dan operasi sederhana. The entire system operates reliably in harsh environments such as high temperature, tekanan tinggi, strong magnetic field, and flammability and explosiveness, which is beneficial for the power industry