INNO फाइबर ऑप्टिक तापमान सेंसर ,तापमान निगरानी प्रणाली.
वर्तमान में, various types of low-voltage distribution cabinets are developing towards miniaturization and compactness. Due to the relatively enclosed cabinet and narrow internal space, electrical equipment operates at full load for a long time, resulting in heat accumulation and temperature rise. इसके अतिरिक्त, the temperature of the heating parts of these equipment cannot be monitored in real-time manually. इसलिए, long-term high-temperature operation can easily damage the insulation performance of electrical equipment, affect the normal operation of the system, and cause economic losses.
The existing switchgear temperature is manually monitored, which is labor-intensive, ग़लत, and cannot be continuously monitored at multiple points. The existing high-voltage cabinets do not have an automatic monitoring system. तथापि, during long-term operation, the power cables of the high-voltage cabinets age, and the contacts of the switches heat up due to aging or excessive contact resistance. Long term high current, cables and switches operate under high load, which can easily cause contact erosion or high-temperature deformation and carbonization of the insulation isolation cover, leading to accidents. FJINNO provides an intelligent temperature measurement and monitoring system for low-voltage switchgear.
Copper busbar trunking has increasingly replaced wires and cables in indoor low-voltage power transmission trunk projects, and has become an important branch of distribution equipment, widely used in various industries. तथापि, in the practical application of copper bars entering wire ducts, due to long-term operation in the air and the influence of ambient temperature and humidity, थर्मल विस्तार और संकुचन, सतह स्केलिंग, ऑक्सीकरण या क्षरण हो सकता है, जिसके परिणामस्वरूप संपर्क ढीले हो गए और संपर्क ख़राब हो गया. The copper bar entering wire joints during operation may experience abnormal temperature overheating, which may lead to fire or major safety accidents. ऑपरेशन के दौरान, the copper busbar entering the wire duct is in a fully enclosed state, so it is necessary to monitor the temperature of the copper busbar entering the wire duct joint to improve the reliability of the operation of the copper busbar entering the wire duct.
Fiber optic temperature measurement system for incoming cabinet
1. The फ्लोरोसेंट फाइबर ऑप्टिक तापमान माप device can measure the temperature of the incoming and outgoing lines, बसबार, संपर्क, and other positions of the switchgear;
2. फाइबर ऑप्टिक तापमान माप, multi-channel and multi-channel temperature measurement, करने में सक्षम three, six, nine temperature measurements, वगैरह;
3. उच्च वोल्टेज प्रतिरोध, विरोधी हस्तक्षेप, इन्सुलेशन, and stable तापमान माप. The products provided by FJINNO comply with international technical standards.
4. The manufacturer provides attentive service, independently develops and produces, and provides after-sales support.
फाइबर ऑप्टिक तापमान सेंसर, बुद्धिमान निगरानी प्रणाली, चीन में वितरित फाइबर ऑप्टिक निर्माता
 |
 |
 |