Hersteller von Druckentlastungsgeräten für Transformatoren und Überdruckschutzgeräten

Was ist ein Transformator-Druckentlastungsgerät??

A Druckentlastungsvorrichtung für Transformatoren (PRD) is a critical safety component that prevents catastrophic transformer tank rupture by automatically venting excessive internal pressure. When internal faults generate rapid gas expansion or oil vaporization, the PRD opens instantly to release pressure buildup, protecting the transformer tank from explosive failure.

Also known as a Transformator-Sicherheitsventil oder Überdruckventil, this device acts as the last line of defense against transformer explosions caused by internal arcing faults, Isolationsausfall, or thermal overload conditions.

Why PRDs Are Essential

Internal transformer faults can generate pressure rises exceeding 100 psi within seconds. Without proper pressure relief, this buildup causes violent tank rupture, oil fires, and severe equipment damage. Transformer explosion prevention devices bieten:

• Personensicherheit: Prevents dangerous tank explosions near personnel and facilities
• Geräteschutz: Safeguards expensive transformer assets from catastrophic structural damage
• Brandschutz: Controlled venting reduces risk of ignition and oil fires
• Insurance Compliance: Required by most electrical codes and insurance policies

Technische Spezifikationen

Common models of pressure relief valves are displayed. Please contact us for more information

Modell	Transformatorkapazität	Operating Pressure	Connection Size
PRD-50	50-315 kVA	7-10 psi	DN50
PRD-80	315-1000 kVA	7-10 psi	DN80
PRD-100	1-3.15 MVA	7-10 psi	DN100
PRD-150	3.15-10 MVA	7-10 psi	DN150

How PRDs Work

Der transformer overpressure protection system uses a spring-loaded diaphragm or disc mechanism calibrated to open at predetermined pressure thresholds (typischerweise 7-10 psi). When internal pressure exceeds this setpoint:

1. Excessive pressure overcomes spring force, lifting the relief disc
2. Pressurized gas and oil vapor vent rapidly through discharge ports
3. Pressure drops below threshold; spring force reseats the disc automatically
4. Optional contact switches signal SCADA systems when activation occurs

PRD Operating Principle

Normal Condition

PRD Housing

Relief Disc

Spring Force

Normal Pressure

Overpressure Event

Disc Lifted

Gas Venting

HIGH PRESSURE

Pressure Force

Fault Occurs

Operation Sequence

1. Normaler Betrieb:
Spring force keeps relief disc sealed against normal pressure (0-6 psi)

2. Fehlererkennung:
Internal fault creates rapid pressure rise (7-10+ psi)

3. Automatic Relief:
Disc lifts, venting gas/vapor in milliseconds

4. Auto-Reset:
Spring reseats disc when pressure normalizes

Installationsrichtlinien

• Mounting Position: Install vertically on transformer cover to ensure proper venting direction away from personnel and equipment
• Clearance Requirements: Maintain minimum 3-foot radius clear zone around discharge path
• Torque Specifications: Follow manufacturer torque values for flange bolts to prevent oil leaks
• Elektrische Anschlüsse: Wire optional alarm contacts to monitoring systems using shielded cable
• Testen: Never test PRD operation while mounted on energized transformer

Anwendungen

Unser transformer pressure relief valves schützen:

• Verteilungstransformatoren (50kVA – 3.15MVA)
• Leistungstransformatoren (3.15MVA – 100MVA+)
• Substation transformers
• Generator-Aufwärtstransformatoren
• Industrial plant transformers
• Mobile/temporary transformers

Why Choose Our PRDs?

Häufig gestellte Fragen

Faseroptischer Temperatursensor, Intelligentes Überwachungssystem, Verteilter Glasfaserhersteller in China