الشركة المصنعة ل مستشعر درجة حرارة الألياف البصرية, نظام مراقبة درجة الحرارة, احترافي تصنيع المعدات الأصلية/تصنيع التصميم الشخصي مصنع, تاجر الجملة, المورد.مخصص.

بريد إلكتروني: web@fjinno.net |

مدونات

تطبيق نظام إنذار محيط الألياف الضوئية الاهتزازي في الكشف عن خطوط الأنابيب

There are various pipelines buried in the city, including transporting water, غاز, والنفط. Once a leak occurs, it will inevitably cause serious ecological damage and huge economic and property losses. في الوقت الحالي, effective and inexpensive safety monitoring methods for oil and gas pipelines before leakage are still a global challenge. لفترة طويلة, a large amount of research has been conducted both domestically and internationally on the use of stress wave method and negative pressure method for leak detection. لكن, due to the insufficient processing of detection signals by various leak detection methods, their applications are not ideal. When a leak occurs, the detection range is too large, time-consuming and laborious. علاوة على ذلك, negative pressure leak detection method needs to damage the pipeline structure and extend the detection head into the pipeline, which is very inconvenient.

تعتبر خطوط الأنابيب مرافق نقل المواد الأساسية للأنظمة المهمة مثل الغاز الطبيعي, زيت, التدفئة الحضرية, والغاز. وله أهمية كبيرة في تنمية الاقتصاد الوطني ونقل الطاقة والمواد. في نفس الوقت, تتمتع مرافق خطوط الأنابيب باستثمارات ضخمة وتقع في الغالب في الخنادق أو مدفونة تحت الأرض. لديهم درجة معينة من الإخفاء في الفضاء. إذا تعرضت للتلف لأسباب بشرية أو طبيعية, ومن الصعب اكتشافها في الوقت المناسب. سيؤدي تسرب المواد القابلة للاشتعال والمتفجرة إلى حدوث مخاطر كبيرة على السلامة. إذا تسبب ذلك في حادث حريق أو انفجار, وسوف يجلب خسائر اقتصادية ضخمة, وحتى تسبب خسائر كبيرة واضطراب اجتماعي.

ال distributed fiber optic vibration sensing system is a very cost-effective event sensing system, which has irreplaceable advantages in long-distance applications exceeding 10km. عادة, in applications where الألياف الضوئية الموزعة vibration sensing and video surveillance systems are linked, these two systems work independently and require independent power supply systems and independent information transmission channels. عادة, in video surveillance systems, the cameras at each monitoring point require local power supply. When the transmission distance exceeds 10km, the power transmission system becomes a very complex and expensive system. In the Gobi, صحراء, sparsely populated mountains, and swamps, local power supply is basically an impossible condition to achieve.

ال vibration fiber optic cable detection alarm system is a powerful perimeter alarm system. Ordinary communication optical cables are used as sensing units, and communication optical cables are used for communication. The front-end detectors are detected using a C/S (client/server) network form. The alarm center can be divided into a multi-level all fiber structure, with unlimited access to detectors. The alarm center can be interconnected through the Internet or local area network. Transfer the detected intrusion and destruction signals to the alarm center server, analyze and process the signals through alarm software, ultimately determine the alarm information, and display the alarm location on the electronic map. The alarm center is connected to a network type data collector through a local area network. Each alarm center can connect up to 128 network type data collectors. Each collector can deploy two defense zones and can set up 256 defense zones, with an effective length detection of 1000m for each defense zone. Each collector has an independent IP address, which can directly control or adjust the working status and internal parameters of the collector in the control room.

سؤال

مستشعر درجة حرارة الألياف الضوئية, نظام مراقبة ذكي, الشركة المصنعة للألياف الضوئية الموزعة في الصين

قياس درجة حرارة الألياف الضوئية الفلورية جهاز قياس درجة حرارة الألياف الضوئية الفلورية نظام قياس درجة حرارة الألياف الضوئية الفلورية الموزعة

السابق:

التالي:

ترك رسالة