The intelligent measurement and control device for transformers is a temperature controller specially designed for dry-type transformers. The characteristics of this device are strong anti-interference ability, large output contact capacity, complete functions, colorful LCD display interface with illustrations, simple setting, і простота експлуатації; With reliable EMC, EMI performance. The temperature sensor can be customized and uses conventional PT100 temperature measurement. The intelligent temperature measurement device for dry-type transformers is installed on the ground. Цей продукт має унікальні технічні переваги у вимірюванні температури в особливих середовищах, таких як висока напруга та сильні електромагнітні перешкоди.
① The device has a maximum of 8 PT100 temperature measurement channels and a maximum of 2 PTC trip protection channels. Can be configured as needed.
② 1 Канал зв'язку RS485, Протокол MODBUS RTU.
③ 1-way fan control, default contact capacity 5A/250VAC, optional high power. The fan operation can be manually controlled by touching the buttons.
④ 1 door switch signal input.
⑤ 8-way relay output, can be used for door opening alarm output, over temperature alarm output, over temperature trip output, device fault alarm output, iron core alarm output, power loss alarm output, fan remote transmission output, fan fault output, output dry contact, contact capacity 5A/AC250V (optional 5A/DC220V). The specific configuration is based on the actual order and wiring diagram.
Особливості продукту
① The protection level is IP4x
② The contact output capacity is large.
③ Equipped with a 5-inch color LCD touch screen display.
④ The регулятор температури використовує ЦП з архітектурою ARM із потужними можливостями обробки даних і стабільною продуктивністю системи.
⑤ The circuit board design concept of the temperature controller is modular design, із сильним і слабким електричним розділенням, щоб уникнути просторових перехресних перешкод.
⑥ The temperature controller contains a clock chip and historical data storage with time markers.
⑦ RS485 communication function, communication protocol is the international open standard protocol Modbus RTU.
Dimensions of intelligent temperature measurement devices for special transformers
Спосіб установки:Floor standing
Зовнішній вигляд розмірів:1500mmx600mmx400mmm (height x width x depth)
Bottom installation size: 300mm x 400mm (відстань між отворами) (installation holes 4x diameter 14)
Installation dimension diagram of XB-S201 special transformer intelligent temperature measurement device

Волоконно-оптичні датчики температури INNO ,Системи контролю температури.







