How to install the alarm host of the distributed fiber optic vibration monitoring system-INNO

Fiber optic vibration monitoring system alarm host With the continuous exploration and development of fiber optic technology in the past decade, the fiber optic detection and alarm system using fiber optic sensing as the detection method has gradually matured and stabilized. Compared with traditional alarm detection technology, it has many advantages such as resistance to electromagnetic wave interference, wide applicability, висока чутливість, висока прихованість, і сильна здатність проти перешкод. It has been applied to the security and prevention systems of airports, important warehouses, в'язниці, finance, and high-end buildings.

Fiber optic vibration monitoring

Traditional security technologies mainly include infrared targeting, laser detection, electrostatic induction, тощо, all of which have the disadvantages of poor system stability, installation limitations, and high false alarm and false alarm rates.
Video surveillance, as a very popular monitoring method at present, although it can monitor and collect evidence for intrusions, it has the disadvantages of high false alarm rate and requiring staff to be on duty 24 hours a day. Fiber optic fence perimeter intrusion detection equipment uses fiber optic sensors as a new type of security measure for intrusion detection, which has many advantages such as full passive, anti electromagnetic interference, good insulation resistance, good concealment, and the ability to achieve large-scale detection.

The fiber optic vibration monitoring system solution integrates multiple security subsystems such as electronic fence perimeter alarm system, video, контроль доступу, освітлення, тощо. The system operates independently and has openness and compatibility; Multi system linkage. When someone invades the defense zone, the lighting, тривога, video and other related systems are activated simultaneously, and the control center synchronously links the alarm printer and electronic map. The overall response time is about 2 секунд; Platform based management. This plan constructs a unified security comprehensive management platform and utilizes comprehensive platform software to achieve centralized management of multiple systems. The detection fiber optic has no external signal radiation, no electromagnetic leakage, and is not affected by external electromagnetic interference.

telephone

The alarm host of the fiber optic vibration monitoring system is powerful and has a mandatory CcC certification report. It can control 512 defense zones and can divide all defense zones into 8 subsystems for independent control. The LCD screen control keyboard of the alarm host is easy to operate. It can be linked with sound and light alarms, alarm printers, electronic maps, and videos.

The fiber optic vibration alarm host monitors the presence of external disturbances by utilizing the changes in light intensity received by sensors, converts the received optical signals into photoelectric signals, and performs pattern recognition through digital signal processing. The processed data is processed according to the selected mode, and intrusion judgment is performed. When the intrusion conditions are met, a linkage alarm is carried out to achieve fiber optic vibration anti intrusion warning. тому, when there is external disturbance, effective early warning can be carried out, solving the problems of manual intervention and high false alarm rate in existing early warning systems, achieving high automation and low false alarm rate. The fiber optic vibration host can achieve higher accuracy by pattern matching based on signals. When the intrusion conditions are met, a linkage alarm is triggered, and multiple methods of simultaneous alarm are achieved through TCP alarm message push, UDP alarm message push, and SMS message push. This compensates for the shortcomings of a single alarm method and prevents staff from missing information during alarm checking, effectively ensuring the reliability of system operation and reducing the probability of failure.

Installation method of fiber optic vibration alarm detector
The detector is installed at the partition of the fence (marked in the on-site survey drawings), and the optimal installation height is 1.4m from the ground at the bottom of the detector’s rain box (this height is derived from the height of the lamp switch box in the strong current embedded project, which is convenient for maintenance operations). The rain box is fixed to the wall with expansion bolts, and the detector is hung on the panel of the rain box, and the detector is well connected to the grounding pile.

Installation method of terminal box for fiber optic vibration monitoring system
The terminal box can be fixed on the pillar or iron mesh at the connection point of the iron mesh, about 1.5m from the ground. To avoid false alarms caused by loose installation of terminal boxes, в якості точок установки слід вибрати міцні і міцні стовпи або туго натягнуті залізні сітки. Під час встановлення, для фіксації можна використовувати кріпильні пристосування, або зв'язувальні дроти можна використовувати для фіксації. Проте, незалежно від використовуваного методу, клемна коробка повинна бути щільно і надійно закріплена на носії.

Спосіб монтажу сегнетоелектричного середовища для волоконно-оптичної системи вібромоніторингу:
При прокладанні оптичних кабелів на залізі, через твердість заліза, кількість сенсорних оптичних кабелів слід збільшити, щоб забезпечити надійне виявлення сигналів вторгнення. Аналізуючи характеристики зловмисників, які перетинають паркан, Рекомендується прокласти сенсорний оптичний кабель вздовж горизонтальної залізної поручні у верхній частині, середина, і низ залізної огорожі. У залізній огорожі, на стовпах буде встановлено кілька залізних перил. If the area of the pillars is not large, the optical cable can be laid directly over the pillars. Проте, some pillars have a large cross-section and are easy for intruders to use to enter this area. тому, such areas must be protected. An iron mesh can be installed at the top of the pillar, and when laying optical cables, the sensing optical cable can be laid onto the iron mesh.