INNO fiber optik sıcaklık sensörleri ,sıcaklık izleme sistemleri.
Why do reactors need to use fluorescent fiber optic temperature measurement systems
When the reactor sends abnormal or faulty signals, the faulty area of the reactor heats up and the temperature rises. By monitoring the temperature, the operating status of the reactor can be determined, thereby achieving the goal of protecting the reactor. General temperature measurement devices cannot measure the internal temperature of reactors. To solve this problem, FJINNO'lar floresan fiber optik sıcaklık ölçüm sistemi can solve it through its anti-interference and high-temperature and high-pressure resistance characteristics.
Introduction to Fiber Optic Temperature Measurement System for Reactors
The IF-DK series reactor optical fiber temperature measurement adopts a fluorescent optical fiber temperature measurement device. The sensing probe of this device is made of non-metallic material and quartz optical fiber, which has complete electrical insulation and is not affected by high voltage and strong electromagnetic fields. It is resistant to chemical corrosion and pollution, and has fast response speed, basit kurulum, and high temperature resistance. The backend software is used for real-time online monitoring. Sistem üç bölümden oluşuyor: a fluorescent fiber optic sıcaklık kontrol cihazı, floresan fiber optik prob, ve fiber optik iletişim yazılımı.
| temel işlev (Conventional D-type) |
1. Three winding temperature measurement; Automatic/manual start/stop of cooling fan; Temperature display value compensation function for each channel 2. Kara kutu işlevi sağlayın, which can record the temperature data of the last power outage and the highest historical temperature; 3. Digital tube display; 4. Transformatör kapı dolabı noktası açma alarm fonksiyonunu sağlayın; 5. Sağlamak 1 set of over temperature alarm contacts (1 normally open, 1 normally closed); 6. Sağlamak 1 set of over temperature trip contacts (1 normally open, 1 normally closed); 7. Sağlamak 1 set of fan remote transmission contacts (1 normally open, 1 normally closed); 8. Sağlamak 1 set of temperature controller fault alarm contacts (1 normally open, 1 normally closed); |
| Customized features (Customizable for special needs) |
1. Sağlamak 1 iron core temperature measurement and 2 iron core over temperature alarm contacts (1 normally open, 1 normally closed) (ben çalışıyorum); 2. RS485 iletişim fonksiyonunu sağlayın, zaman işaretleyicileri ile iletişim, capable of receiving time synchronization, MODBUS-RTU protocol (F işlevi); 3. Fan fault diagnosis function and provision of fan fault alarm contacts (L işlevi); 4. Sağlamak 4 bağımsız 4-20mA analog akım çıkış fonksiyonları (E işlevi); 5. Provide temperature measurement and control for the entire computer room environment; (G function) 6. Sargı sıcaklığı artış hızı ve demir çekirdek sıcaklık artış hızı için alarm fonksiyonu; 7. İletişim protokolü Profibus gibi yöntemleri benimseyebilir, IEC60870-5-103, Ethernet iletişimi, vesaire; |
On site case study of fluorescence fiber optic temperature measurement device
 |
|
