What is the safest temperature measurement method for dry-type transformer windings-INNO

Overview of solutions for fluorescent fiber optic temperature controllers for dry-type transformers
The measurement range specified in the “Kidhibiti cha Joto cha Kielektroniki cha Transfoma” (JB/T7631-2016), which uses Pt100 as the traditional temperature sensor, inaweza tu kuwa chini ya 1000V, and this sensor is made of metal material, ambayo inaleta hatari kwa usalama. Kwa hiyo, temperature sensor probes and leads for measuring transformer winding temperature have higher requirements.

The fiber optic temperature controller uses our company’s independently developed sensor ya joto ya nyuzi za fluorescent kama kipengele cha kuhisi halijoto. Kipengele hiki cha kuhisi halijoto ni kinga dhidi ya kuingiliwa na sumakuumeme na ni sugu kwa volteji ya juu (100Umbali wa KV/nyuzi hadi ardhini wa 0.4m). Fluorescent fiber optic temperature measurement completely solves potential safety hazards from the source of temperature measurement and improves the safety level of transformers.

Target of mfumo wa kipimo cha joto cha nyuzi za fluorescent kwa transfoma ya aina kavu
For the operating environment of dry-type transformers, isolation and shielding from external electrical interference signals are achieved from the power supply, signal input end, signal output end, and temperature control box shell.
No metallic substances, usalama wa ndani.
In response to vibration, vumbi, unyevunyevu, oil and other on-site working environments, multi-layer protective measures are taken to ensure that the fiber optic mtawala wa joto has good electromagnetic compatibility, ensuring stable and reliable operation.
Design principles of fluorescent fiber optic temperature measurement host for dry-type transformers
Principle of practicality
The system construction adheres to the principle of practicality. On the basis of practicality, progressiveness and foresight are considered, and standard, advanced and mature products and development platforms are selected to build a system that is practical and solves practical problems.

Standardization principle
The system software and hardware platforms and application development tools used in application construction should comply with national standards, standards of the Ministry of Information Industry, relevant technical specifications and requirements of the company.

The principle of uniformity
Following the policy of centralized information management, overall planning, overall design, and step-by-step implementation, the implementation process embodies four unified principles: unified leadership, unified planning, unified standards, and unified organization and implementation.

Reliability principle
The software and hardware resources need to ensure the uninterrupted and reliable operation of the mfumo wa kipimo cha joto la fiber optic kwa 7 × 24 masaa. Kwa hiyo, it is necessary to equip a complete design of reliability measures to ensure the highly reliable operation of the system and fully consider the reliability requirements of key system applications.

Reliable security mechanism
This system adopts a series of secure encryption measures, with a built-in 64 bit encryption algorithm. The system has higher security and can effectively prevent data leakage and theft, ensuring the security, usahihi, and integrity of the system’s data, and preventing illegal operator operations and legitimate operator illegal operations.

The operation interface is simple, friendly, and highly intelligent
The system automatically checks the legality of the input data and provides friendly prompts for operator errors.

Stable operation and reliable data.
The platform is easy to operate, easy to master, and the installation process is simple. Data can be automatically generated into various reports as needed, improving management efficiency.
Principle of Fluorescent Fiber Optic Temperature Measurement
The fiber optic probe consists of three parts: ST connector, fiber optic cable, and end temperature sensing end. Kiunganishi cha ST ni sehemu ya uunganisho na moduli ya photoelectric; Fiber optic cable ni sehemu ya maambukizi, na nyuzi za quartz ndani. Fiber ya quartz ina mipako na kufunika nje, na sleeve ya kinga ya Teflon kwenye sehemu ya nje; The end temperature sensing end contains temperature sensitive rare earth materials, which excite fluorescence after being irradiated by fixed wavelength light. After the excitation stops, the relationship between the decay time constant of fluorescence afterglow and temperature is a quasi exponential function. The temperature can be obtained by measuring the time constant of afterglow; Fiber ya macho ni sugu kwa joto la juu la 200 ℃ na ina kipenyo cha nje cha 3mm. Radi ya kupinda ya muda mrefu ya 13.2cm. Short term bending radius 4.4cm

The sensor probe material is rare earth fluorescent material, and its biggest advantage compared to other optical fiber temperature measurement principles is that temperature measurement is independent of light intensity. It has strong compatibility with the inconsistency of fluorescence intensity, optical path attenuation, and circuit drift in hardware. Kwa hiyo, it is not affected by electromagnetic interference and can withstand high voltage, making it very suitable for high voltage, strong magnetic field, flammable and explosive temperature measurement occasions.

Introduction to wiring and installation of fiber optic temperature controllers for dry-type transformers
1.1 Structural framework
Mfumo huo una sehemu tatu: a fluorescent fiber optic temperature controller, uchunguzi wa optic wa nyuzi za fluorescent, na programu ya mawasiliano ya fiber optic.

The data transmission between the backend system and the temperature measurement terminal adopts RS485 communication method.

All data collection, usimamizi, and temperature display are completed by communication software, and the system mainly realizes data collection and monitoring of temperature measurement. The fiber optic temperature measurement terminal integrates multi-channel fluorescent optical fibers, providing external RS485 communication, kupambana na kuingiliwa, and corrosion-resistant design.

Application functions of fiber optic temperature controller system for dry-type transformers
1.1 Ufuatiliaji wa wakati halisi
The data collection density can be set according to customer needs, and the system will collect data regularly based on the set parameters. Kisha, it will be displayed in table form or curve drawing to achieve real-time monitoring. Real time monitoring of equipment operation status; Real time monitoring and recording of reactor temperature.

1.2 Basic functions
1) Temperature data query

1. You can query temperature data for specified dates, browse, print, and export to Excel.

2) Historical temperature data storage

1. Permanently record temperature data

Introduction to fiber optic temperature controller for dry-type transformers
2.1 Sifa kuu
The fiber optic temperature controller is embedded installation. This product has unique technical advantages in temperature measurement in special environments such as high voltage, kuingiliwa kwa nguvu ya sumakuumeme, nk. The temperature hotspot and measurement signal receiving part of the fluorescent sensor ya joto ya fiber optic do not use electrical connections, ambayo inaweza kufanya kazi kwa usahihi wa juu na utulivu kwa muda mrefu, kuboresha kwa kiasi kikubwa anuwai ya maombi. The fiber optic temperature controller has high accuracy and sensitivity, is resistant to high pressure and can be remotely monitored, has a long lifespan, ni ndogo kwa ukubwa, hufanya matengenezo ya chombo kuwa rahisi na rahisi, and ensures safe transportation.

2.2 Main functions
Provide three winding temperature measurement; Anza kiotomatiki/kimwongozo kitendakazi cha feni cha kukomesha kupoeza; Utendakazi wa fidia dijitali kwa thamani za maonyesho ya kila kituo
The digital tube displays the temperature of the transformer’s hot spot on a circuit;
Kutoa kazi ya sanduku nyeusi, which can record temperature data and historical maximum temperature before three power outages;
Toa kipengele cha kengele cha kufungua mlango wa baraza la mawaziri la transfoma;
Provide functions such as over temperature alarm, fault alarm, safari, nk
Toa kazi ya mawasiliano ya RS485, communication with time mark can receive timing or MODBUS-RTU protocol (F kazi)
2.3 Vipengele vya ziada
Toa 4 huru 4-20mA kazi za pato za analogi za sasa; (Utendakazi wa E)
Utendakazi wa ulinzi wa kipimo cha halijoto ya PTC usio na mstari unaohisi upinzani; (C kazi)
Alarm function for winding temperature rise rate and iron core temperature rise rate;
The communication protocol can adopt methods such as Profibus, IEC60870-5-103, Mawasiliano ya Ethernet, nk;