Оптоволоконные датчики температуры INNO ,системы контроля температуры.
Professional intelligent monitoring device for box type transformers, manufacturer of environmental management systems for box type substations, customized intelligent integrated monitoring project solutions for power equipment, распределительное устройство, ring main unit, подстанции, distribution stations, and switching stations.
Introduction to environmental management system products for box type substations
Cabinets such as box type substations and containerized box type substations are outdoor electrical equipment that operate in extremely harsh environments (such as large temperature differences in the morning and evening, большой возврат влаги в фундамент, high relative humidity in the air, high temperatures in summer, и т. д.). A large number of cabinets operating on site have experienced varying degrees of condensation or icing inside. The water droplets generated by condensation fall on the internal components, клеммы проводки, шины, и т. д.. кабинета министров, образование дефектов изоляции и аварий, подвергая опасности оборудование и личную безопасность.
The environmental management system of the box type substation adopts comprehensive treatment and control measures for the formation mechanism of condensation or ice (relative humidity of air, temperature of air inside the box, и т. д.), completely destroying the conditions for condensation or ice formation, and eliminating cabinet condensation or ice.
The specialized environmental management system for box type substations can measure multiple environmental temperatures and humidity, multiple dew point data, multiple smoke alarms, and oil surface temperature data inside the box.
Особенности продукта
① The protection level is IP65.
② The CPU using ARM architecture has strong data processing capabilities and stable system performance.
③ OLED LCD screen, digital and Chinese display, button operation, LED signal indication display.
④ The design concept of the internal circuit board is modular design, with strong and weak electrical separation to avoid spatial crosstalk.
⑤ Contains a clock chip and historical data storage with time markers.
⑥ RS485 communication function, communication protocol is the international open standard protocol Modbus RTU.
The IX-22FSCW intelligent monitoring device for new energy is a high-end intelligent comprehensive monitoring and protection device developed specifically for green and energy-saving industries such as wind power and photovoltaic power generation; Этот продукт характеризуется сильной защитой от помех, complete functions, OLED interface with illustrations, простые настройки, and easy operation; С надежными характеристиками EMC и EMI, он может безопасно работать в различных сложных и суровых географических условиях., providing intelligent monitoring and protection for the safe operation of new energy transmission and distribution equipment in high altitude, спрей с высоким содержанием соли, устойчивость к низким температурам, and high humidity environments; Мониторинг приборов является высокоинтеллектуальным и функционально интегрированным., with easy and simple installation, stable and reliable operation.
The following is an introduction to some functions, который может быть настроен в соответствии с потребностями клиента. Для подробной информации и запросов, пожалуйста, свяжитесь с компанией
| основная функция | 1. Oil temperature detection function; 2. Environmental temperature detection function; 3. Environmental humidity detection function; 4. Automatic/manual start stop cooling fan and heater functions; 5. OLED liquid crystal display, LED display light; 6. Clock function; 7. Black box function: Записывать 10 times of power failure temperature data, historical highest temperature, время, and function contact output status; 8. Provide passive contacts for over temperature alarm (нормально открытый); 9. Provide passive contacts for over temperature tripping (нормально открытый); 10. Provide passive contacts for the fan; (Normally open) 11. Provide passive contacts for the heater; (Normally open) 12. Provide fault alarm indication signals; |
| Optional features: | 1. Winding temperature measurement (Коннектикут) detection function; 2. Environmental smoke detection function; 3. Environmental dew point detection function; 4.4~20mA analog current output function; 5. Ethernet communication function: Модбус TCP, an internationally open standard protocol; |
Product composition
 |
Environmental management monitoring host (customizable functions) 1. Связь RS485, 2.2 Environmental temperature and humidity (using sensors developed by our company) 3.2 Smoke alarm: does not display smoke concentration, only provides contact output 4.2 Road Dew Point Monitoring and Control 6.9 Passive contacts: 2 фанаты 2 обогреватели 2 конденсация 2 smoke zero 1 fault 7. ЖК-дисплей 8. Clock function 9. The power supply circuit is processed using a power module 10. Three protections for circuit boards 11. Special program requirements: A environment temperature control heater low temperature, heating up temperature; B Smoke alarm output inhibits heater and fan startup 12.1 AC220V power output: for use by dehumidifiers |
| Armored oil level sensor (optional according to host function) 1. Материал: 304 stainless steel 2. Sensor cable length: Standard configuration of 8 метры, настраиваемый 3. Stainless steel pipe length: 110mm or 90mm (настраиваемый) |
 |
 |
Environmental sensor probe (optional according to host function, standard length of 8 метры, customizable length) 1. Smoke temperature and humidity three in one sensor 2. Dew point sensor 3. Smoke temperature two in one sensor 4. Temperature and humidity two in one sensor 5. Датчик дыма 6. Датчик влажности |
