INNO glasvezel temperatuursensoren ,temperatuurbewakingssystemen.
De Online SF₆-gasdauwpunt & Dichtheidsbewakingssysteem is ontworpen voor continu, real-time monitoring van sporenvochtgehalte, dauwpunt temperatuur, en gasdichtheid in SF₆-geïsoleerde elektrische apparatuur. Het wordt veel gebruikt in GIS, AIS, en SF₆-stroomonderbrekers, het bieden van betrouwbare gegevensondersteuning voor conditiegebaseerd onderhoud, asset management, en smart grid-toepassingen.
Door online SF₆-vochtmonitoring te integreren, meting van de gasdichtheid, en intelligente datacommunicatie, Dankzij het systeem kunnen nutsbedrijven en industriële gebruikers de risico's van isolatieverslechtering in een vroeg stadium detecteren en de veiligheid garanderen, stabiele werking van hoogspanningsapparatuur.
SF₆ Gas Trace Moisture Online Monitoring System Overview
SF₆ gas is an ideal insulating and arc-quenching medium due to its excellent electrical and chemical properties. Echter, excessive trace moisture content and abnormal SF₆-gasdichtheid can significantly reduce dielectric strength, accelerate insulation aging, and increase the risk of internal discharge and equipment failure.
De SF₆ Gas Trace Moisture Online Monitoring System continuously measures key gas parameters, including moisture content (ppmv), dew point, gas density, druk, temperatuur, en relatieve vochtigheid. The system supports online operation without gas emission and provides long-term, stable monitoring for SF₆ electrical apparatus.
Online SF₆ Dew Point and Moisture Measurement Principle
The system adopts high-stability trace moisture sensing technology combined with an internal gas circulation sampling method. Water vapor content in SF₆ gas is measured in real time and converted into multiple engineering values, inbegrepen:
- Trace moisture content (ppmv)
- Dew point temperature (°C)
- Temperatuur- and pressure-compensated gas density
Built-in intelligent temperature and pressure compensation algorithms effectively eliminate environmental influences, ensuring accurate and repeatable measurement results under varying operating conditions.
Integrated SF₆ Gas Density and Moisture Monitoring Solution
Unlike standalone dew point analyzers or mechanical density gauges, this integrated SF₆ gas density and moisture monitoring solution combines multiple sensing functions into a unified online system. It enables synchronized monitoring, centralized data management, and unified alarm processing for multiple measurement points.
The system is suitable for 110 kV tot 750 kV voltage levels and is widely applied in SF₆ circuit breakers, GIS, and AIS installations in substations and power plants.
Key Advantages of Online SF₆ Moisture Density Monitoring System
High-Accuracy SF₆ Trace Moisture and Dew Point Measurement
- Trace moisture measurement accuracy: ±4% FS
- Dew point measurement accuracy: ±2 °C
- Pressure measurement accuracy: ±1% FS
Zero-Emission SF₆ Gas Monitoring Technology
- Internal circulation sampling design
- No SF₆ gas discharge during measurement
- Environmentally friendly, safe, and economical operation
Industrial-Grade Design for Harsh Environments
- Volledig verzegeld, waterproof, and dustproof enclosure
- Sterke weerstand tegen elektromagnetische interferentie
- Operating temperature range: -40 °C tot +80 °C
Flexible Networking and Remote Monitoring
- Supports RS485 and Ethernet communication
- Modbus protocol supported
- Single system supports up to 64 monitoring points
SF₆ Trace Moisture and Density Sensor Unit
De SF₆ trace moisture and density sensor unit is installed directly at the monitoring point of SF₆-insulated equipment. It performs continuous sensing and data transmission of gas parameters under actual operating conditions.
The sensor unit supports online measurement of:
- SF₆ trace moisture content
- Dew point temperature
- Gas pressure and calculated density
- Ambient and gas temperature
- Relative humidity
Multiple valve and interface options are available, making on-site installation, inbedrijfstelling, and maintenance convenient and efficient.
SF₆ Online Moisture Monitoring Controller and Data Acquisition Unit
The centralized monitoring controller collects data from multiple sensor units and performs real-time analysis, data storage, and alarm processing. It serves as the core of the online SF₆ moisture monitoring system.
- Multi-point data acquisition and centralized management
- Real-time alarm and historical data recording
- Support for fan and auxiliary device linkage control
- Hot-swap capability without interrupting system operation
Applications of SF₆ Gas Moisture Density Monitoring System
- Gasgeïsoleerde schakelapparatuur (GIS)
- SF₆ High-Voltage Circuit Breakers
- Air-Insulated and Gas-Insulated Switchgear (AIS / GIS)
- Substation SF₆ gas safety and condition monitoring
Technical Specifications of SF₆ Moisture Density Monitoring System
Trace Moisture and Density Sensor Unit
| Parameter | Specificatie |
|---|---|
| Temperature Measurement Range | -40 °C tot +80 °C |
| Temperatuurnauwkeurigheid | ±0,5 °C |
| Pressure Measurement Range | 0 naar 1.00 MPa (abs.) |
| Pressure Accuracy | ±1% FS |
| Dew Point Measurement Range | -50 °C tot +20 °C |
| Dew Point Accuracy | ±2 °C |
| Trace Moisture Measurement Range | 10 naar 20,000 ppmv |
| Trace Moisture Accuracy | ±4% FS |
| Communicatie-interface | RS485 |
| Voeding | DC 12 V |
| Stroomverbruik | 300 mW |
Online Monitoring Controller
 |
 |
| Parameter | Specificatie |
|---|---|
| Operating Voltage | AC/DC 220 V ±10% |
| Communicatie-interface | RS485 / Ethernet |
| Maximum Monitoring Points | Tot 64 punten |
| Stroomverbruik | <10 W |
| Bedrijfstemperatuur | -25 °C tot +70 °C |
SF₆ Trace Moisture Density Monitoring System FAQ
Does the system require SF₆ gas discharge during measurement?
Nee. The system uses an internal circulation sampling design and does not discharge SF₆ gas during online monitoring, ensuring environmentally friendly and safe operation.
How many monitoring points can be connected to one system?
A single monitoring controller supports up to 64 monitoring points, making it suitable for large-scale GIS installations.
Can the system be integrated with SCADA or third-party platforms?
Ja. The system supports RS485 and Ethernet communication and is compatible with Modbus protocol for easy integration with SCADA and other monitoring platforms.
Is the system suitable for outdoor or harsh environments?
Ja. The sensor unit features a fully sealed, industrial-grade design with excellent resistance to dust, vocht, en elektromagnetische interferentie.
Is customization available?
Ja. Monitoring points, communicatie methoden, systeem functies, and alarm logic can be customized according to project requirements.
Why Choose Our SF₆ Online Dew Point and Density Monitoring Solution
- In-house R&D and customization capability
- Extensive experience in power and substation monitoring applications
- Designed to meet smart grid and condition-based maintenance requirements
- Long-term technical support and system upgrade services
Get Technical Support and Quotation
For detailed technical solutions, product selection assistance, or pricing information, please contact our engineering team. We provide customized SF₆ gas moisture and density online monitoring solutions tailored to your application requirements.
Contact us today to request a quotation or technical consultation.
Customer Reviews
★★★★☆ (4.7 out of 5 based on 23 reviews)
★★★★★
Stable long-term SF6 dew point monitoring in GIS installations. The system provides reliable moisture and density data and integrates smoothly with RS485 communication.
— Substation EPC Contractor, Duitsland
★★★★☆
Accurate measurement of trace moisture and gas density for SF6 circuit breakers. Installation and commissioning are straightforward.
— Power Utility Maintenance Team, Southeast Asia
★★★★★
Reliable online SF6 moisture monitoring system for continuous operation. Suitable for harsh substation environments.
— Electrical Engineering Company, Midden-Oosten
Vrijwaring
All specifications and descriptions on this page are for reference only. Actual product configuration, prestatie, and appearance are subject to the final delivered product and technical agreement. The manufacturer reserves the right to modify product specifications without prior notice.
