저전압 배전 캐비닛 수신 캐비닛 개폐 장치 온도 모니터링 시스템, 제조업체, manufacturer-INNO

현재, various types of low-voltage distribution cabinets are developing towards miniaturization and compactness. Due to the relatively enclosed cabinet and narrow internal space, electrical equipment operates at full load for a long time, resulting in heat accumulation and temperature rise. 게다가, the temperature of the heating parts of these equipment cannot be monitored in real-time manually. 그러므로, long-term high-temperature operation can easily damage the insulation performance of electrical equipment, affect the normal operation of the system, and cause economic losses.

The existing switchgear temperature is manually monitored, which is labor-intensive, inaccurate, and cannot be continuously monitored at multiple points. The existing high-voltage cabinets do not have an automatic monitoring system. 하지만, during long-term operation, the power cables of the high-voltage cabinets age, and the contacts of the switches heat up due to aging or excessive contact resistance. Long term high current, cables and switches operate under high load, which can easily cause contact erosion or high-temperature deformation and carbonization of the insulation isolation cover, 사고로 이어지는. FJINNO provides an intelligent temperature measurement and monitoring system for low-voltage switchgear.

Copper busbar trunking has increasingly replaced wires and cables in indoor low-voltage power transmission trunk projects, and has become an important branch of distribution equipment, widely used in various industries. 하지만, in the practical application of copper bars entering wire ducts, due to long-term operation in the air and the influence of ambient temperature and humidity, 열팽창과 수축, 표면 스케일링, 산화 또는 부식이 발생할 수 있습니다., 그 결과 접촉이 느슨해지거나 접촉 불량이 발생합니다.. The copper bar entering wire joints during operation may experience abnormal temperature overheating, which may lead to fire or major safety accidents. 작동 중, the copper busbar entering the wire duct is in a fully enclosed state, so it is necessary to monitor the temperature of the copper busbar entering the wire duct joint to improve the reliability of the operation of the copper busbar entering the wire duct.

Fiber optic temperature measurement system for incoming cabinet

1. 그만큼 형광성 광섬유 온도 측정 device can measure the temperature of the incoming and outgoing lines, 모선, 콘택트 렌즈, and other positions of the switchgear;

2. 광섬유 온도 측정, multi-channel and multi-channel temperature measurement, 할 수 있는 three, six, nine temperature measurements, 등;

3. 고전압 저항, 간섭 방지, 격리, and stable 온도 측정. The products provided by FJINNO comply with international technical standards.

4. The manufacturer provides attentive service, independently develops and produces, and provides after-sales support.