INNO 光ファイバー温度センサー ,温度監視システム.
蛍光ファイバーによる監視: 主な技術的利点
Q: Why choose fluorescent fiber sensors for high-voltage equipment?
- ±0.5°C accuracy on live 35kV switchgear contacts (IEC 62271-1 認定された)
- 64-point real-time monitoring with 15kV galvanic isolation
- Direct winding embedding in 500MVA transformers (25kV/mm dielectric)
- EMI immunity under 150kV/μs transients
- Proven 99.97% uptime in 220kV substations
→ 40% maintenance cost reduction verified in operational case studies
Fluorescent Fiber Optic Temperature Monitoring Solutions for Critical Power Assets
1. Switchgear Contact Temperature Monitoring
Technical Implementation:
- Direct mounting on 10kV-35kV fixed contacts using ceramic insulated probes (CTI≥600)
- 4-channel redundant measurement per circuit breaker compartment
- 500μs response time for arc fault prediction
| パラメータ | 仕様 | Test Standard |
|---|---|---|
| プローブ直径 | Φ1.5mm stainless steel sheathed | IEC 62271-1 |
| 温度範囲 | -40°C to 250°C | IEEE C37.20.2 |
| 絶縁耐力 | 15kV AC/min (50Hz) | IEC 60270 |
2. 油入変圧器巻線監視
Implementation Features:
- Direct winding embedding using mineral oil-compatible FEP fibers
- 16-point measurement per phase winding (radial distribution)
- ±0.3°C accuracy at 100°C reference
| 成分 | Technical Solution | パフォーマンスデータ |
|---|---|---|
| Fiber Probe | 3mm OD triple-jacketed assembly | 25kV/mm dielectric strength |
| インストール | Winding inter-turn insertion | ≤0.2% winding deformation |
| 較正 | In-situ oil bath calibration | ±0.15°C repeatability |
グローバルな導入事例
場合 1: 220kV Substation Switchgear Retrofit (マレーシア)
- インストール済み 128 蛍光センサー 32 パネル
- Detected 5℃ abnormal temperature rise on busbar joints
- Prevented potential $2.8M outage loss
場合 2: 500MVA Transformer Fleet Monitoring (カナダ)
- 埋め込み 48 fiber probes in 12 電源変圧器
- Identified 8℃ hot-spot differential during peak load
- Extended OLTC maintenance cycle by 40%
Professional Support Services
24/7 emergency support available for existing systems
光ファイバー温度センサー, インテリジェント監視システム, 中国の分散型光ファイバーメーカー
 |
 |
 |