Fluorescence fiber optic is used for temperature measurement in power systems-INNO

Temperature measurement is an important means of detecting and maintaining power system faults. In current power system thermal temperature measurement, traditional electrical signal temperature sensors are mainly used in situations where the power system voltage is high, insulation requirements are high, and electromagnetic interference is strong, and cannot directly measure the thermal temperature inside electrical equipment. したがって, it is necessary to find a method suitable for measuring the thermal temperature of power systems and electrical equipment. Fluorescent fiber temperature measurement technology can solve the problem of thermal temperature measurement in power equipment. It has the characteristics of high voltage resistance, 高い断熱性, 電磁干渉耐性, and is the future technological development direction for thermal temperature measurement of electrical equipment in power systems. Fiber optic temperature measurement technology mainly includes 分散型光ファイバー temperature measurement technology and infrared temperature measurement technology. その中で, infrared temperature measurement technology can only measure the surface temperature of electrical equipment and cannot measure the internal thermal temperature of electrical equipment. The installation method of fluorescent fiber temperature measurement technology is convenient compared to traditional electrical signal installation and can be directly embedded.
の 光ファイバー温度測定システム is divided into two parts: the bottom temperature measurement unit and the upper system. The bottom temperature measurement unit consists of multiple temperature measurement fiber optic temperature measurement devices such as transformers, 高圧開閉装置, high-voltage busbars, cable heads, 等. The computer system consists of a main control room and on-site monitoring devices. The fiber optic temperature measurement device adopts RS485 interface communication mode, which is converted into fiber optic communication signals through photoelectric converters. The remote control room and on-site monitoring device achieve remote communication, improving the reliability and anti-interference ability of the communication system.
On the basis of 蛍光ファイバーの温度測定 テクノロジー, a complete temperature measurement scheme was designed in combination with substation equipment. Through experimental verification, the temperature measurement system has a temperature measurement range of 0-200 ℃ and an accuracy of 0.5 ℃, which meets practical requirements. The temperature measuring device has the characteristics of low cost, 安定したパフォーマンス, strong practicality, 速い応答, 安定性, and simple operation. The entire system operates reliably in harsh environments such as high temperature, 高圧, strong magnetic field, and flammability and explosiveness, and has strong targeting for temperature measurement environments in the power industry. After a large amount of testing data and practical verification results, it is suitable for the field of temperature measurement of power equipment.