INNO 光ファイバー温度センサー ,温度監視システム.
The BWDK-Q201F dry-type transformer temperature controller is a temperature control device developed by Fuzhou INNO . The following are its functional characteristics, 技術的パラメータ, and application scenarios:
機能的な特徴 (Partial Introduction)
Temperature monitoring and control: It can display temperature in three-phase loop and maximum value, and can automatically/manually control the start and stop of the fan. When the temperature reaches the set value, the fan will automatically start to dissipate heat, and when the temperature drops, the fan will automatically shut down.
Alarm and protection functions: equipped with over temperature alarm, over temperature trip, fault alarm, and cabinet door opening alarm functions.
通信機能: Add RS485/232 serial communication function, which can upload temperature data and equipment status to the backend DCS system for remote monitoring and centralized management. 技術仕様
環境条件: 環境温度 -20 ℃~+55 ℃, 環境湿度<95% (25 ℃).
動作電源: AC220V (+10%, -15%), power consumption ≤ 10W.
Measurement range and accuracy: 温度測定範囲 -30.0 ℃～240.0℃, measurement accuracy ± 1% FS, 解決 0.1 ℃.
アプリケーションシナリオ
Power system: used to monitor the temperature of dry-type transformer windings, prevent insulation aging or short circuits caused by overheating, ensure stable operation of the power grid, and suitable for temperature control of equipment such as box transformers and medium voltage distribution cabinets.
光ファイバー温度センサー, インテリジェント監視システム, 中国の分散型光ファイバーメーカー
 |
 |
 |
