را سیستم اندازه گیری دمای فیبر نوری توزیع شده می تواند نظارت بر زمان واقعی دمای داخل و خارج لوله های مخازن ذخیره سازی سقف شناور خارجی را اجرا کند, مخازن ذخیره سازی سقف شناور داخلی, مخازن ذخیره سازی سقف قوسی, مخازن کروی تحت فشار, مخازن ذخیره سازی سقف شناور خارجی, مخازن ذخیره سازی سقف شناور خارجی, و مخازن ذخیره سازی سقف شناور خارجی.
کل سیستم مانیتورینگ از دو بخش تشکیل شده است: سخت افزار و نرم افزار. بخش سخت افزاری شامل چهار سیستم است, namely: سیستم سنسور فیبر نوری; سیستم جمع آوری داده ها; سیستم ارتباط و انتقال داده: سیستم تجزیه و تحلیل و پردازش داده ها. سیستم های مختلف از طریق اتصالات شبکه فیبر نوری کار می کنند.
با توجه به تحلیل بهینه سازی مدل کلی ساختاری مزرعه مخزن, سنسورها و لوازم جانبی مربوطه که باید در مزرعه مخزن نصب شوند شامل: fiber optic liquid level sensors, فیبر نوری توزیع شده sensors for pipeline leakage monitoring, distributed fiber optic temperature sensors, as well as signal amplifiers, regulators and other accessories.
سیستم جمع آوری داده ها
Including data collection stations controlled by microcomputers installed outside the tank area, each collection station is a PC based collection substation. Their main function is to collect data transmitted by fiber optic sensors, انجام تهویه سیگنال, perform preliminary data processing and storage, and then transmit it to the data processing and analysis system of the monitoring center. سیستم ارتباط و انتقال داده
This includes the establishment of network operating system platforms, sites, network protocols for security monitoring of local area networks, and connections with other local area networks or backbone networks.
Data processing and analysis system
Connect several high-performance workstations to several data collection stations in the tank area to form a computer network. The workstation is a desktop computer installed in the monitoring and management center outside the tank area, and equipped with the required data display software. The workstation realizes data collection and processing, monitoring data display, system control management and maintenance, and security analysis and evaluation.
The real-time monitoring system for the tank farm mainly includes the following functions:
1) Report the current status information of each storage tank, including the items stored in the tank, سطح مایع, and whether there are leaks.
2) Set up a daily signal alarm system for the daily safety management of the tank area.
3) Monitor fire alarm information in the tank area and conduct preliminary fire alarm handling.
سیستم سنسور فیبر نوری
The fiber optic measurement unit and fiber optic sensor are installed on site in the tank area, while the photoelectric converter, منبع تغذیه, and computer system are installed at the data acquisition station, and the two are connected through optical cables.
Distributed fiber optic sensors for pipeline leakage monitoring
Lay a parallel optical cable near the oil and gas pipeline, using optical fibers as sensors to pick up pressure and vibration signals generated by incidents such as oil and gas pipeline leaks, nearby mechanical construction, and human damage. At the light incidence end, locate the losses caused by the above events using an optical time-domain reflectometer; At the optical output end, use an optical power meter to detect changes in optical power and determine the type of event based on signal characteristics. Distributed fiber optic sensors can monitor pipeline leaks. بنابراین, laying distributed fiber optic sensors around the pipeline in the tank area can be used for real-time online monitoring of pipeline leaks.
Distributed fiber optic temperature sensing network
The distributed fiber optic temperature sensing network for industrial process detection is a real-time, آنلاین, and multi-point سیستم اندازه گیری دمای فیبر نوری, which is a new detection method and technology. The optical fiber in the system is both a transmission medium and a sensing medium. By utilizing the strength of the fiber’s backward Raman scattering, the back Raman scattering photoelectric signal with temperature signal is collected by a wavelength division multiplexer and a photodetector. After signal processing and demodulation, the temperature information is extracted in real-time from noise and displayed. It is a typical laser fiber temperature communication network. It can collect 1000 temperature information and perform spatial positioning on a 2km long optical fiber, and has been applied in the automatic temperature alarm system for tank area fires.
Distributed Fiber Optic Data Communication and Transmission System
The communication between various systems is achieved through all optical communication technology. All optical communication technology is a type of fiber optic communication technology that is improved to address the numerous electronic conversion devices present in ordinary fiber optic systems. This technology ensures that the signal transmission and exchange between users are all carried out using optical wave technology, یعنی, the transmission process of data from the source node to the destination node is carried out in the optical domain, and its exchange at each network node is carried out using all optical network switching technology.
The all optical communication network consists of an all optical internal part and a general network control part. The internal all optical network is transparent and can accommodate multiple business formats. Network nodes can transparently send or receive from other nodes by selecting appropriate wavelengths. By appropriately configuring wavelength routing optical crossover devices, transparent optical transmission can be extended to larger distances. The external control part can achieve network reconstruction, dynamically allocating wavelengths and capacity throughout the entire network to meet changes in communication, business, و الزامات عملکرد, and provide a network with good survivability and strong fault tolerance.
سنسور دمای فیبر نوری, سیستم مانیتورینگ هوشمند, تولید کننده فیبر نوری توزیع شده در چین
![]() |
![]() |
![]() |
سنسورهای دمای فیبر نوری INNO ,سیستم های مانیتورینگ دما.



