How to choose temperature sensors from fiber optic temperature measurement manufacturers-INNO

Fiber optic grating accelerometers are mainly used for low-frequency vibration monitoring in environments such as bridges, represas, y grandes estructuras. The response and acquisition speed of fiber optic grating accelerometers are extremely fast, which can reflect the working and health status of the tested structure in real time. A single sensor is a one-dimensional directional accelerometer, which can be combined into a multidimensional accelerometer through a three-dimensional bracket. The sensor needs to be connected to a high-speed fiber Bragg grating demodulator with a sampling frequency of over 100Hz in order to measure accurately.

las características de Fibra óptica grating accelerometer:

1. Wide applicability

Suitable for low-frequency vibration monitoring in environments such as bridges, represas, large structures, and equipment;

2. Stable sensor technology

Alta sensibilidad, greater than pm/m.s-2; Good low-frequency response characteristics, 1-40Hz;

3. Security of Fibra óptica sensores

Seguridad intrínseca, Sin necesidad de fuente de alimentación; Anti electromagnetic interference and anti radiation; Resistencia a la corrosión; Buena estabilidad;

4. System universality

Larga vida útil, Instalación sencilla, and reusable;

5. Sensors have a long detection distance

Long transmission distance, tens of kilometers;

An accelerometer is a sensor that senses the instantaneous acceleration state of a moving carrier, and the measurement of acceleration is an important topic in engineering technology. When the motion carrier has acceleration, various devices inside the carrier will be subjected to force. Especially for the measurement of spatial positions such as airplanes, rockets, barcos, barcos, satellites, etc., the real-time spatial position of the carrier can be calculated by integrating acceleration detection with initial position information.