مستشعر الألياف الضوئية لقياس درجة الحرارة قياس درجة حرارة الألياف الضوئية الفلورية في أنظمة الطاقة

There are many methods for fiber optic temperature measurement, including fluorescence fiber optic temperature measurement, gallium arsenide fiber optic temperature measurement, قياس درجة حرارة الألياف الضوئية الموزعة, grating Bragg temperature sensors, إلخ. FJINNO provides fluorescence fiber optic temperature measurement products, which are more affordable than other fiber optic temperature measurement products. مرحبا بكم في الاتصال بنا

Temperature is a fundamental physical quantity in production and daily life. لكن, some target environments are more complex, or the target environment is harmful, the target is not stationary, the target cannot be contacted or approached, إلخ., all of which make temperature measurement difficult. With the advancement of technology, industrial production and other fields have increasingly high requirements for temperature, which requires thermometers to have high accuracy, استجابة سريعة, وقدرة قوية ضد التدخل. في الوقت الحاضر, these high-end thermometers are very scarce and expensive. Traditional thermometers (such as thermocouples and thermistors) are based on the electromagnetic type of materials, and their measurement signals are modulated by electromagnetic signals, making them susceptible to electromagnetic interference and requiring high requirements for the measurement environment.

The fluorescence lifetime temperature measurement device is used for temperature measurement, which has high sensitivity, دقة عالية, تكلفة منخفضة, مكافحة التدخل الكهرومغناطيسي, التكرار الجيد, مقاومة التآكل, عزل كهربائي جيد, هيكل بسيط, and good optical path disturbance. It can be connected to a computer to achieve remote telemetry.

Fiber optic temperature sensors use optical fibers to transmit temperature signals, which have good insulation performance and can block high voltage inside the switchgear. لذلك, fiber optic temperature sensors can be directly installed on the high voltage contacts inside the switchgear, accurately measuring the working temperature of the high voltage contacts and completing online monitoring of the working temperature of the switchgear contacts. Fluorescent fiber optic sensors are directly installed on high-voltage equipment, with accurate temperature measurement and the ability to handle electrical insulation issues. خصائص أنظمة قياس درجة حرارة الألياف الضوئية are not affected by climate and environment, and can measure the temperature of outdoor switches and bus joints.
Sensors are installed on high-voltage equipment and are electrically connected to the receiving device’s temperature gauge, which has high-voltage isolation performance and fundamentally solves the problem of difficult monitoring of operating temperature at high-voltage equipment contacts. They have extremely high reliability and safety, allowing fluorescent temperature sensors to be installed on each high-voltage switch and bus joint. The temperature sensor is installed on the surface of the high-voltage equipment, collects its temperature, and transmits the data to the fluorescent fiber optic thermometer. The fluorescent fiber optic thermometer displays the received data on the LCD screen and monitors whether the temperature exceeds the limit. عندما تتجاوز درجة الحرارة الحد المسموح به, it outputs an alarm signal
خصائص نظام قياس درجة حرارة الألياف الضوئية: وهو مخصص لمراقبة درجة الحرارة عبر الإنترنت في الوقت الحقيقي والتحذير من ارتفاع درجة حرارة المعدات ذات الجهد العالي. ويستخدم الألياف الضوئية لعزل الجهد العالي ونقل الإشارات, utilizing the inherent insulation and electromagnetic field interference resistance of fiber optic. Fiber optic temperature sensors are installed on the surface of the tested target, such as the contacts, bus contacts, and power cable joints in the high-voltage switchgear, and can accurately and quickly measure the surface temperature. The measured data is transmitted to the temperature measurement instrument host through fiber optic Fiber optic can be arranged reasonably according to the internal structure of high-voltage equipment, without affecting the operation of the original equipment. The fiber optic thermometer is installed on the cabinet panel or other suitable positions, and it will display the temperature values of each measured point on the LCD screen. في نفس الوقت, it will monitor whether the temperature exceeds the limit. عندما تتجاوز درجة الحرارة الحد المسموح به, it will output an alarm signal.

مستشعر درجة حرارة الألياف الضوئية, نظام مراقبة ذكي, الشركة المصنعة للألياف الضوئية الموزعة في الصين